Kärcher Owners Manual - 1 of 21
Kärcher Owners Manual - 2 of 21
Kärcher Owners Manual - 3 of 21
Kärcher Owners Manual - 4 of 21
Kärcher Owners Manual - 5 of 21
Kärcher Owners Manual - 6 of 21
Kärcher Owners Manual - 7 of 21
Kärcher Owners Manual - 8 of 21
Kärcher Owners Manual - 9 of 21
Kärcher Owners Manual - 10 of 21
From inside (document excerpt):
Model HD 3000 P art No. 1.187-116 High Pressure Washer Operator Manual Overview . .1 P recautions .1-2 As s embly Ins tructions .3 Operating Ins tructions .4 Us ing the Acces s ories . .5 Working with Detergents .6 S hut Down and C lean-Up . .7 Taking a B reak . .7 Winterizing and Long-Term S torage . .7 C leaning Tips .8-9 Optional C leaning Acces s ories . .9 Troubles hooting . .10-11 Specifications Max.
Operating pres s ure 3000 P S I Max. Water volume 3.2 G P M E ngine 9 HP Honda G X 270 or vis it our webs ite: www.k arc her-us a.c om 1 -8 0 0 -5 3 7 -4 1 2 9 In US A C all: or vis it our webs ite: www.k arc her.c a ¤ 1 -8 0 0 -4 6 5 -4 9 8 0 In C anada C all: HD3000 Manual 9/20/02 5:28 PM Page 2 Model HD 3000 OVERVIEW Item Description High pressure outlet Water inlet with garden hose connector and filter Detergent suction tube Knob Assembly (two each, Bolt & Knob) High pressure hose 18 Hose Reel Detergent filter Handle 4 Trigger gun (not pictured) 15 Trigger gun safety lock (not pictured) Pull start (not pictured) 7 Gas tank Oil fill cap (not pictured) Spray wand Quick connect nozzles (5) 1 Pressure control 17 16 2 11 10 9 5 6 8 IMPORTANT PRECAUTIONS Read First! Safety Warnings When using this product, basic precautions should always be followed: · Read all the instructions before using the product. · Fire hazard! Do not add fuel with the engine running. Do not operate if fuel has been spilled. Instead, move the machine to a different location and avoid creating sparks. · Operate and fuel machine in a well ventilated area, free of devices featuring an open pilot or flame such as boilers, water heaters, etc. · High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, animals, electrical devices, or the machine itself. · Wear safety goggles. · Do not use acids, alkalines, solvents, or any flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine. · The machine has hot surfaces which can cause burns. Operate the unit in a safe environment and away from children. · Do not allow the high pressure hose to come into contact with the muffler guard. · Do not leave the machine running unattended. · Learn how to stop the machine and release pressure quickly. Be thoroughly familiar with the controls. · Stay alert — watch what you are doing. · Do not operate the product when fatigued or under the influence of alcohol or drugs. · Do not stand on unstable surfaces. Stand with both feet balanced at all times. · Avoid tipping the machine on its side. · The Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the on position. Water Supply (Cold Water Only) · Water hose must be at least 3/4 inch in diameter. · Flow rate of water supply must not fall below 2.5 GPM (gallons per minute). · Flow rate can be determined by running the water for one minute into an empty 5-gallon container. · The water supply temperature must not exceed 104°F/40°C. · Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc. · Always prevent debris from being drawn into the unit by using a clean water source. We strongly recommend that this high pressure washer not be left running for periods of 5 minutes or longer without the trigger gun being engaged. This Kärcher high pressure washer is equipped with thermal protection to extend the life of your pressure washer. The thermal protector will automatically activate at a predetermined high temperature ejecting hot water before resetting. This ensures that the pump does not become damaged. 2 12 ¤ Detergent dosage control Gun/hose storage handle (not pictured) 19. Dirtblaster® nozzle 20. Safety goggles 21. Operator manuals 1 14 Features: · Low oil sensor · Thermal protection sensor 20 19 13 3 21 NEVER! Never point nozzle at people or animals. Never drink alcohol or use drugs while operating this equipment. Never spray electrical connections, electrical outlets or fixtures. Never add fuel with the engine running or operate where fuel has been spilled. Never touch hot surfaces or allow accessories to contact hot surfaces. Never operate in an enclosed space, exhaust fumes are dangerous. Never operate near utilities with open flames. Never operate pressure washer without the water turned on. Never use hot water. Caution · Follow the maintenance instructions specified in the manual. · This machine has been designed for use with cleaning detergents supplied or recommended by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty. HD3000 Manual 9/20/02 5:28 PM Page 4 ASSEMBLY INSTRUCTIONS OPERATING INSTRUCTIONS Step 1 Attach the handle to the frame of the pressure washer. Align holes, insert bolts, and tighten with knobs. Step 2 Attach the gun/hose storage handle. Step 3 Attach the reel to the handle. Align holes, insert bolts, and tighten with nuts. Step 1 Check oil level. Oil level should be level with the bottom of the oil filler neck. Be sure the machine is level when checking the oil level. (Refer to the engine’s operating manual for seasonal grades.) We recommend that the oil be changed after the first 5 hours of use, then once every 50 hours. Note: Improper oil levels will cause low oil sensor to shut off engine.