2009-2011 Husqvarna CS2172WH CS2166 Chainsaw Owners Manual, 2009,2010,2011 - Enlarge page 1 of 44
2 of 44
3 of 44
4 of 44
5 of 44
6 of 44
7 of 44
8 of 44
9 of 44
10 of 44
11 of 44
12 of 44
13 of 44
14 of 44
15 of 44
16 of 44
17 of 44
18 of 44
19 of 44
20 of 44
21 of 44
22 of 44
23 of 44
24 of 44
25 of 44
26 of 44
27 of 44
28 of 44
29 of 44
30 of 44
31 of 44
32 of 44
33 of 44
34 of 44
35 of 44
36 of 44
37 of 44
38 of 44
39 of 44
40 of 44
41 of 44
42 of 44
43 of 44
44 of 44
From inside (document excerpt):
CS 2172WH CS 2172 CS 2166 Operators manual English Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. KEY TO SYMBOLS Symbols on the machine: WARNING! Chain saws can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Always wear: · Approved protective helmet · Approved hearing protection · Protective goggles or a visor This product is in accordance with applicable EC directives.
Chain Saw User Manual Free Download. Chainsaw Operator’s Manual. Chains for Chainsaws Free Instruction Manual Download PDF. Revision: 2009, 2010, 2011.
Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in chapter Technical data and on label. Chain brake, activated (right) Chain brake, not activated (left) Visual check. Symbols in the operator’s manual: Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance. Always wear approved protective gloves. Regular cleaning is required. Protective goggles or a visor must be worn. Refuelling. Decompression valve: The valve is to reduce the pressure in the cylinder and make starting easier. You should always use the decompression valve when starting the machine. Ignition; choke: Set the choke control in the choke position. This should automatically set the stop switch to the start position. Filling with oil and adjusting oil flow. The chain brake must be engaged when the chain saw is started. Adjustment of the oil pump If your machine bears this symbol it is equipped with heated handles. WARNING! Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury. Other symbols/decals on the machine refer to special certification requirements for certain markets. 2 English CONTENTS Contents KEY TO SYMBOLS Symbols on the machine: . Symbols in the operator’s manual: . CONTENTS Contents . INTRODUCTION Dear Customer, WHAT IS WHAT? What is what on the chain saw? . GENERAL SAFETY PRECAUTIONS Before using a new chain saw Important Always use common sense Personal protective equipment . Machines safety equipment . Cutting equipment ASSEMBLY Fitting the bar and chain . FUEL HANDLING Fuel STARTING AND STOPPING Star ting and stopping . WORKING TECHNIQUES Before use: . General working instructions How to avoid kickback MAINTENANCE General . Carburettor adjustment . Carburettor with movement limiters Checking, maintaining and servicing chain saw safety equipment Muffler Starter Air filter . Spark plug Lubricating the bar tip sprocket Needle bearing lubrication . Adjustment of the oil pump . Cooling system.
Wikipedia’s page for Husqvarna
Publisher: www.husqvarna.com