Carrier Owners Manual - Enlarge page 1 of 50
2 of 50
3 of 50
4 of 50
5 of 50
6 of 50
7 of 50
8 of 50
9 of 50
10 of 50
11 of 50
12 of 50
13 of 50
14 of 50
15 of 50
16 of 50
17 of 50
18 of 50
19 of 50
20 of 50
21 of 50
22 of 50
23 of 50
24 of 50
25 of 50
26 of 50
27 of 50
28 of 50
29 of 50
30 of 50
31 of 50
32 of 50
33 of 50
34 of 50
35 of 50
36 of 50
37 of 50
38 of 50
39 of 50
40 of 50
41 of 50
42 of 50
43 of 50
44 of 50
45 of 50
46 of 50
47 of 50
48 of 50
49 of 50
50 of 50
From inside (document excerpt):
58DLA/58DLX Deluxe Induced-Combustion 4-Way Multipoise Furnace Installation, Start-up, Operating, and Service and Maintenance Instructions -Series 110 THE COMFORTTM 80 GAS FURNACE The 58DLA/DLX 4-way Multipoise Gas Furnaces offer deluxe features not found in other single-stage 80% gas furnaces. Carrier’s QuietTechTM noise reduction system makes the Comfort 80 an incredibly quiet induced draft gas furnace.
The exclusive Carrier Media Cabinet provides an economic way to add high performance air filtration to homes. The WeatherMaker 8000 control system provides a dehumidification mode, a third motor speed selection for continuous fan operation selectable at the thermostat, and fault code storage in the event of power outages. Applications are easy with 4-way multipoise design, through-thefurnace downflow venting, 13 different venting options, and a door designed for easy service access. An inner blower door is provided for tighter sealing in sensitive applications. The 58DLA/DLX furnaces are approved for use with natural or propane gas, and the 58DLX is also approved for use in Low NOx Air Quality Management Districts. STANDARD FEATURES – QuieTech noise reduction system – Media Filter Cabinet Included – Microprocessor based control center Dehumidification selection for summer-time cooling Adjustable heating air temperature rise Adjustable cooling airflow ComfortFanTM–Constant fan speed selectable from thermostat LED diagnostics and self test feature Stores fault codes during power outages – 4-way Multipoise furnace, 13 vent applications – Hot surface ignition (HSI) – Draft safeguard switch to ensure proper furnace venting – All models are Chimney-Friendly when used with accessory vent kit – Insulated blower compartment – Heat pump compatible – Residential installations eligible for consumer financing through the Retail Credit Program – Twinning in Upflow, Downflow and Horizontal LIMITED WARRANTY – 20-year warranty on “Super STM ” heat exchanger – 3-year warranty on microprocessor control and hot surface ignition – 5-year parts warranty on all other components Catalog No: 535-80126 Form No. 58DL-4SI 1-05 Important Information Addendum to the Installation, Start-up, and Operating and Maintenance Instructions Series 110 or Series B 33 1/3 ” Mid-Efficiency Furnaces