Carrier 58MVP 3SM Gas Furnace Owners Manual

58MVP Deluxe 4-Way Multipoise Variable-Capacity Direct-Vent Condensing Gas Furnace Service and Maintenance Instructions For Sizes 040–120, Series 121 ® ama CANADIAN GAS ASSOCIATION Read the entire instruction manual before performing any service or maintenance. This symbol indicates a change since the last issue.

Heating, Ventilating and Air Conditioning User Manual Free Download. HAVC Operator’s Manual. Gas Furnace and AC Free Instruction Manual Download PDF.

Index Page SAFETY CONSIDERATIONS 1-2 ELECTROSTATIC DISCHARGE (ESD) PRECAUTIONS 2 GENERAL 2 CARE AND MAINTENANCE 2-11 Cleaning and/or Replacing Air Filter .3 Blower Motor and Wheel Maintenance 3-4 Cleaning Burners 4 Cleaning Heat Exchangers 4-5 Primary Heat Exchangers 4-5 Secondary Heat Exchangers 5 Flushing Collector Box and Drainage System 7 Servicing Hot Surface Ignitor .7-8 Electrical Controls and Wiring .8-9 Troubleshooting .9-10 Checking Heat Tape Operation (If Applicable) 10 Winterizing 11 SERVICE LABEL 12-13 WIRING DIAGRAM .14 SAFETY CONSIDERATIONS Installing and servicing heating equipment can be hazardous due to gas and electrical components. Only trained and qualified personnel should install, repair, or service heating equipment. Untrained personnel can perform basic maintenance functions such as cleaning and replacing air filters. All other operations must be performed by trained service personnel. When working on heating equipment, observe precautions in the literature, on tags, and on labels attached to or shipped with the unit and other safety precautions that may apply. As an ENERGY STARSM Partner, Carrier Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency. A92496 CERTIFICATION OF MANUFACTURING SITE Fig. 1–Multipoise Furnace in Upflow Orientation Canada, refer to the current edition of the National Standard of Canada CAN/CGA-B-149. Wear safety glasses and work gloves. Have a fire extinguisher available during start-up and adjustment procedures and service calls. Recognize safety information. This is the safety-alert symbol. When you see this symbol on the unit and in instructions or manuals, be alert to the potential for personal injury. Understand the signal words DANGER, WARNING, and CAUTION. These words are used with the safety-alert symbol. DANGER identifies the most serious hazards which will result in severe personal injury or death. WARNING signifies hazards which could result in personal injury or death. CAUTION is used to identify unsafe practices which would result in minor personal injury or product and property damage. NOTE is used to highlight suggestions which will result in enhanced installation, reliability, or operation. Follow all safety codes, including NFPA 54/ANSI Z223.1-1992, National Fuel Gas Code and ANSI/NFPA 90B, Installation Standards, Warm Air Heating and Air Conditioning Systems. In Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.

Wikipedia’s page for Carrier

Carrier Company Web Site: www.corp.carrier.com