New Holland MC22 MC28 MC35 Soft Side ROPS Parts List

New Holland MC22, MC28, MC35 Soft Side/ROPS Parts List & Mounting Instructions Jodale · Perry Printed: 2001/11 New Holland MC22, MC28, MC35 Mounting Instructions Standard Parts List Qty 1 Description Front Cab Mount Bracket Photo L&R Rear Cab Mount Brackets 1 Inner Foot Platform Shield 1 Outer Foot Platform Shield 1 Rear Access Panel (pre-upholstered) 1 Step Bracket 2 2 1 14 LF 5.5 LF 1 Cab Lift Brackets (1 ” Tube) 3/8 ” Black Snap Caps Ignition (Orange), Ground (Black), Power (Red Longer), Power Jumper (Red Shorter), 30 Amp Circuit Breaker, 30 Amp Relay 180° O-rubber ¼ ” x ¾ ” NDAX Front Headlight Shroud (Plastic) NOTE: All references to left and right are taken from the operator’s point of view when he/she is sitting in the driver’s seat.

Agricultural Equipment Manual Free Download. Lawn Mowers Specs. Power Harvesting Machinery Free Specification Download PDF.

New Holland MC22, MC28, MC35 Mounting Instructions Standard Bolts List Qty Description Bolt, Hex, ½ ” x 3 “, Grade 8, Yellow Dichrome Bolt, Hex, ½ ” x3 ½ “, Grade 8, Yellow Dichrome Bolt, Carriage, 5/8 ” x 3 ½ “, Grade 8, Yellow Dichrome Bolt, Hex, 3/8 ” x 1 “, Grade 8, Yellow Dichrome Bolt, Flange, 3/8 ” x ¾ “, Grade 8, Yellow Dichrome Nut, Hex, ½ “, Grade 8, Yellow Dichrome Nut, Hex, 5/8 “, Grade 8, Yellow Dichrome Nut, Hex, 3/8 “, Grade 8, Yellow Dichrome Washer, Lock, ½ “, Plated Washer, Lock, 5/8 “, Plated Washer, Lock, 3/8 “, Plated Washer, Steel, Flat, ½ ” x 2 ½ “, Plated Washer, Rubber, Flat, 9/16 ” x 2 ½ “, Black Isolator, Rubber, ½ ” x 2 ½ “, Black Bolt, Flange, ¼ ” x ¾ “, Yellow Dichrome Nut, Flange, ¼ “, Yellow Dichrome Nut, Hex, 10-24, Plated Screw, Pan-Head, 10-24 x 1 “, Plated NOTE: All references to left and right are taken from the operator’s point of view when he/she is sitting in the driver’s seat. New Holland MC22, MC28, MC35 Mounting Instructions Optional Parts Lists Heater Option Soft Side (if equipped) Qty 1 1 2 22LF Description 3/8 NPT x 3/8 ” Barb – 180° Fitting (pressure) 3/8 NPT x 3/8 ” Barb – 90° Fitting (suction) HS-6 Hose Clamps 3/8 ” Heater Hose (installed onto heater core) Photo NOTE: All references to left and right are taken from the operator’s point of view when he/she is sitting in the driver’s seat. New Holland MC22, MC28, MC35 Mounting Instructions NOTE: Use the following torque specifications for all hardware: ½ ” hardware 73 ft-lbs, 3/8 ” hardware 42 ft-lbs, 5/8 ” hardware 177 ft-lbs. 1. Prior to installation, remove upper 2-post ROPS member. Retain seat mounting hardware for re-use. If equipped with a front mower, remove step plate from mower deck. 2. Take the left rear bracket, ensure that the square punch is on the outside, and position it on the lower left 2-post ROPS member and snugly bolt it into place using 2 – 5/8 ” x 3 ½ ” carriage bolts, 5/8 ” lock washers, and 5/8 ” hex nuts. It is critical that the carriage bolt head is on Figure 2 the exterior of the bracket to provide extra clearance for the cab frame. (See 5. Use the 2 – 9/16 ” diameter holes in the Figure 1)

Wikipedia’s page for New Holland Agriculture

New Holland Company Web Site: www.newholland.com