Simplicity 555 755 1693161 1693163 1693425 1693162 1693164 1693426 Series Snow Blower Owners Manual

How to use this file .(Operators Manuals) -­­­ Instructions for Print Vendors (Paper Manuals) Paper Size: * 11 x 17 * Body–50 lbs brilliant white offset or equivalent. * Cover–on pre-printed two-tone “Swash ” stock. * Body–1-color, 2-sided * Cover imprint –1-color, 1-sided * Saddle Stitch, Face Trim, 3-Hole Drill * Face Trim * This file contains several manuals, which differ only in their covers. * Covers are all present at the beginning of this file. * Back cover for a particular manual is the page IMMEDIATELY AFTER the front cover.

Snow Blower and Snow Thrower User Manual Free Download. Snow Removal Operator’s Manual. Free Manual Download PDF.

· Check the front cover for the individual part number (typically a 171xxxx number). · The body of the manual is identical, regardless of the cover used. * REMEMBER: ODD number pages are ALWAYS right hand pages, and EVEN number are ALWAYS left hand pages. * This instruction page is NOT part of the manual and must NOT be printed. · Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK ” are placement pages ONLY, and should NOT be printed. Press: Bindery: COVERS: BODY: General: -­­­ If you have further questions on how to utilize this file, please contact Simplicity Technical Publications Department at (414) 284-8650. THIS PAGE INTENTIONALLY BLANK OPERATOR’S MANUAL Intermediate Snowthrower Models 555 Models Mfg. No. 1693161 1693163 1693425 Description 555M, 5HP Snowthrower, Manual Start 555M, 5HP Snowthrower, Manual Start (Export) 555M, 5HP Snowthrower, Manual Start 755 Models Mfg. No. 1693162 1693164 1693426 Description 755E, 7HP Snowthrower, Electric Start 755M, 7HP Snowthrower, Manual Start (Export) 755E, 7HP Snowthrower, Electric Start 1717676-03 Rev 8/1998 TP 100-2062-03-IW-S MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.simplicitymfg.com 1998, Simplicity Manufacturing, Inc. Printed in USA. Table Of Contents SAFETY RULES General .2 Preparation .2 Operation 3 Maintenance & Storage 3 Safety Decals 4 CONTROL REFERENCE CHART Snowthrower Controls .5 Engine Controls 5 CONTROLS Starting Controls .6 Ground Speed Controls 7 Auger Control 7 Deflector Controls .7 Scraper Height Control .7 Traction Lock Control 7 OPERATION General .8 Checks Before Each Start-Up .8 Starting The Engine 9 Operating The Snowthrower .9 Engine Speed .10 Ground Speed Selector 10 Deflector 10 Scraper Bar & Skid Shoes 10 Free Wheeling and Traction Drive Lock 11 After Each Use 11 REGULAR MAINTENANCE Normal Care Chart 12 Off-Season Storage 12 Starting After Storage .12 Checking Auger Gear Case Lubrication .12 Lubrication 13 SERVICE Troubleshooting .14 – 15 Speed Selector Pivot Adjustment .16 Traction Drive Clutch Rod Adjustment 16 Auger Drive Clutch Rod Adjustment .17 Drive Belt Adjustment .17 Adjusting Auger Drive Belt 18 Adjusting Auger Belt Guide .19 Replacing Drive Belts 19 Replacing Auger Drive Belt .20 Roller Chain Replacement 21 Shear Pin Replacement 21 Auger Shaft Bearing Replacement .21 Discharge Chute Worm Assy. Adjustment 22 Discharge Chute Control Rod Gear Adjustment .22 Checking Tire Pressure 22 SPECIFICATIONS 23 REPLACEMENT PARTS & ACCESSORIES 24 TECHNICAL MANUAL AVAILABILITY .24 WARNING You must read, understand and comply with all safety and operating instructions in this manual before attempting to set-up and operate your snowthrower. Failure to comply with all safety and operating instructions can result in loss of machine control, serious personal injury to you and /or bystanders, and risk of equipment and property damage. The triangle in the text signifies important cautions or warnings which must be followed. For easy reference, please record the information on the chart below. The Snowthrower Reference Data can be found on the identification tag located on the unit’s rear frame. (Refer to the Engine Owner’s Manual for location of engine information serial number.) SNOWTHROWER REFERENCE DATA Model Description/Number M/N (Manufacturer’s Number) S/N (Serial Number) Dealer Name Date Purchased WARNING Engine exhaust from this product contains chemicals known, in certain quantities, to cause cancer, birth defects, or other reproductive harm. ENGINE REFERENCE DATA Engine Make/Model Engine ID/Serial Number 1998 Simplicity Manufacturing, Inc. Printed In USA. TP 100-2062-03-IW-S 2062-03 1 Safety Rules WARNING This unit is a “two-stage ” snowthrower.

Wikipedia’s page for Simplicity Outdoor

Publisher: www.simplicitymfg.com