STIHL Owners Manual - 1 of 94
STIHL Owners Manual - 2 of 94
STIHL Owners Manual - 3 of 94
STIHL Owners Manual - 4 of 94
STIHL Owners Manual - 5 of 94
STIHL Owners Manual - 6 of 94
STIHL Owners Manual - 7 of 94
STIHL Owners Manual - 8 of 94
STIHL Owners Manual - 9 of 94
STIHL Owners Manual - 10 of 94
From inside (document excerpt):
STIHL MSE 140, 160, 180, 200 Instruction Manual Manual de instrucciones Warning! To reduce the risk of kickback injury use STIHL reduced kickback bar and STIHL PMMC3 (3/8 ” Picco), PMN (3/8 ” Picco), PM1 (3/8 ” Picco) or PMC3 (3/8 ” Picco) chain depending on sprocket pitch or other available low kickback components. Advertencia! Para reducir el riesgo de lesionarse como resultado de un culatazo, utilice la barra de contragolpe reducido y la cadena PMMC3 (Picco de 3/8 pulg) PMN (Picco de 3/8 pulg), PM1 (Picco de 3/8 pulg) o PMC3 (Picco de 3/8 pulg) de STIHL, dependiendo de la rueda dentada usada y de otros componentes reductores de contragolpe.
Read and follow all safety precautions in Instruction Manual improper use can cause serious or fatal injury. Lea y siga todas las precauciones de seguridad dadas en el manual de instrucciones el uso incorrecto puede causar lesiones graves o mortales. English / USA Contents Allow only persons who understand this Manual to operate your chainsaw. To receive maximum performance and satisfaction from your STIHL chainsaw, it is important that you read and understand the maintenance and safety precautions, starting on page 3, before using your chainsaw. Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in this Manual. ANDREAS STIHL AG & Co. KG, 2007 0458 181 8621. M1. L7. Rei. Printed in Germany Guide to Using this Manual 2 Important Safety Precautions for Chain Saw Users 3 SAFETY PRECAUTIONS . 5 Mounting the Bar and Chain . 24 Tensioning the Saw Chain 27 Checking Chain Tension . 28 Chain Lubricant 28 Filling Chain Oil Tank 29 Checking Chain Lubrication . 29 Coasting Brake . 30 Chain Brake 30 Connecting Saw to Power Supply . 31 Switching On 32 Switching Off 32 Overload Circuit Breaker 32 Operating Instructions 33 Taking Care of Guide Bar . 34 Motor Cooling . 35 Storing the Machine 35 Checking and Replacing Chain Sprocket . 35 Maintaining and Sharpening Saw Chain . 37 Maintenance Chart . 41 Main Parts of the Saw 42 Specifications . 44 Ordering Spare Parts 45 Maintenance and Repairs . 45 Trademarks 45 Addresses 46 Printed on chlorine-free paper. Printing inks contain vegetable oils; paper can be recycled. BA_SE_091_006_01_07.fm !Warning! Because a chainsaw is a high-speed wood-cutting tool, some special safety precautions must be observed as with any other power saw to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. STIHL’s philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time-to-time. If the operating characteristics or the appearance of your chainsaw differs from those described in this Manual, please contact your STIHL dealer for information and assistance. STIHl MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C 1 English / USA Guide to Using this Manual Pictograms All the pictograms attached to the machine are shown and explained in this manual. The operating and handling instructions are supported by illustrations. In addition to the operating instructions, this manual may contain paragraphs that require your special attention. Such paragraphs are marked with the symbols described below: Warning where there is a risk of an accident or personal injury or serious damage to property. Caution where there is a risk of damaging the machine or its individual components. Note or hint which is not essential for using the machine, but may improve the operator’s understanding of the situation and result in better use of the machine. Note or hint on correct procedure in order to avoid damage to the environment. Equipment and features This instruction manual may refer to several models with different features. Components that are not installed on all models and related applications are marked with an asterisk (*). Such components may be available as special accessories from your STIHL dealer. Symbols in text The individual steps or procedures described in the manual may be marked in different ways: : A bullet marks a step or procedure without direct reference to an illustration. Engineering improvements STIHL’s philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time to time. If the operating characteristics or the appearance of your machine differ from those described in this manual, please contact your STIHL dealer for assistance. Therefore some changes, modifications and improvements may not be covered in this manual. A description of a step or procedure that refers directly to an illustration may contain item numbers that appear in the illustration. Example: Loosen the screw (1) Lever (2). 2 MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C English / USA Important Safety Precautions for Chain Saw Users A. Kickback Safety Precautions !Warning! Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a lightning fast reverse reaction, kicking the guide bar up and back towards the operator. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator. Either of these reactions may cause you to lose control of the saw which could result in serious personal injury. Section 5.11 of ANSI B 175.1-2000 sets certain performance and design criteria related to chainsaw kickback.