Toro Tools Greensmaster 1000 Bedknife Replacement Owners Manual - Enlarge page 1 
From inside (document excerpt):
Tools 1/2 “, 11/16 “, 3/4 “, 15/16 ” 3/8 ” Drive Ratchet 1/2 ” Socket Large Channel Lock Pliers in-lb / KgCm Torque Wrench Greensmaster 1000 Bedknife Replacement ® Scraper Pin (1/8 ” Allen Wrench) TOR510880 Parts 57-4910 (13) 52-2900 (4) 52-2890 (2) 1 Remove Bedbar ! Loosen locknut. ! Loosen adjusting screw until thrust washer contacts inside of frame adjuster (both sides of machine). 2 ! Compress spring.
Lawn Mowing User Manual Free Download. Power Lawn Mower Free Instruction Manual Download PDF.
! Insert a pin to hold spring in position (both sides of machine). 3 ! Loosen jam nut. ! Remove bedbar bolts (both sides of machine). 4 ! Remove bedbar. ! Keep the two (2) metal thrust washers. ! Discard nylon washers. ! ! ! ! 5 Replace Bedknife Remove screws from bedbar. Discard screws. Remove bedknife. Use a scraper to clean bedknife mounting surface of bedbar. 93-4264 1/8 ” (3.2 mm) Low Cut 93-4263 3/32 ” (2.4 mm) Tournament 93-4262 5/64 ” (1.9 mm) Micro Lubricants Anti-seize Grease Install Bedbar ! Use grease to hold steel thrust washers against inside of frame adjusters (both sides of machine). ! Put anti-seize lubricant on threads of bedbar bolts. Use new nylon bushings (2) and washers (4). ! Compress adjuster spring and remove pin (both sides of machine) after installing bedbar. 9 ! Tighten bedbar bolts to 240 – 320 in-lb (280 – 370 KgCm). ! Tighten outside flange nuts until washers can just rotate freely. 10 ! Adjust bedknife to reel. ! Adjust so reel can pinch paper without tearing when inserted from front and cut paper cleanly when inserted at a right angle (both ends of reel). ! Use new screws (13). ! Make sure bedknife is perfectly flat ! Put anti-seize lubricant on screw by grinding lightly to original threads. angles or backlap after installing in ! Tighten screws, starting at the center machine. and working toward each end. ! Torque: 200 – 250 in-lb (230 – 290 KgCm) ! DO NOT use an air impact wrench. Greensmaster 1000 Model 04050, 04051, 04052 ® Part No. 96877SL, Rev. A …
Wikipedia’s page for Toro Company
Company Web Site: www.toro.com