Honeywell Solid State Ignitor Spark Generator Q652B Owners Manual

Q652B Solid State Ignitor Spark Generator PRODUCT DATA · Mounts in the same space used by conventional ignition transformer. · Withstands 90% relative humidity at 104°F (40°C). · Weighs 1 pound (0.42 kilogram) versus up to 8-1/2 pounds (3.9 kilograms) for standard transformers. · Meets Underwriters Laboratories Inc. (UL) requirements for radio frequency interference (RFI). SPECIFICATIONS IMPORTANT The specifications given in this publication do not include normal manufacturing tolerances. Therefore, this unit may not match the listed specifications exactly.

Power Equipment User Manual Free Download. Electric Generator for Power Manual. Free Manual Download PDF.

Also, this product is tested and calibrated under closely controlled conditions and some minor differences in performance can be expected if those conditions are changed. Model: Q652B1006 Single high voltage electrode for gas, with “Rajah ” and screw connectors. Electrical Ratings: Voltage and Frequency: 120 Vac (+10%, -15%), 60 Hz. Output peak voltage at 21 kHz: 14.0 kV. Secondary open circuit voltage: 10 kV equivalent RMS. Power Consumption: 40 Watts maximum. Interrupted Ignition only: Duty cycle: 20%. 45 seconds on. 180 seconds off. Spark Characteristics: Spark Gap: 0.029 to 0.125 in. (0.7 to 3.2 mm). Firing Rate: 20,000 sparks per second. APPLICATION The Q652B Solid State Ignitor Spark Generator is a light-weight solid state spark generator (ignitor) for use on commercial and industrial gas burners. FEATURES · Ignites interrupted gas pilots with ignition electrodes spacings between 0.029 to 0.125 inches (0.7 to 3.2 mm). · Q652B1006 is used for gas applications. · Q652B1006 has 14.0 kV output peak voltage for reliable light-off. · Recommended for interrupted ignition applications only. Contents Application Features . Specifications . Ordering Information Installation Operation Checkout ® U.S. Registered Trademark 2003 Honeywell International Inc. 63-2159-5 Q652B SOLID STATE IGNITOR SPARK GENERATOR Energy Discharge: 1 millijoule per spark. Discharge TIme: 50 microseconds per spark. Maximum air velocity in gap is 55 ft. (16.76 m) per sec. Ambient Temperature Range: 14°F to 113°F (-10°C to +45°C). Maximum Ambient Humidity: 90% RH at 95°F (40°C). Weight: 0.925 lb. (0.42 kg). Dimensions: See Fig. 1. Approvals: Underwriters Laboratories Inc. Component Recognized: File No. MH14381 (Gas). CSA File No. LA66894. Recommended Ignition Cable: 32004766-001 24 in. (610 mm) Ignition Cable Assembly. 32004766-002 120 in. (3.05 m) Ignition Cable Assembly. 32004766-003 Ignition Cable (per foot, specify required length). 32004766-004 60 in. (1.52 m) Ignition Cable Assembly. Cable should be rated for 25 kV at 482°F (250°C). HIGH VOLTAGE ELECTRODE LEAD WIRES FOR 120V CONNECTION, 19 INCHES LONG 2-25/32 (71) 2-15/16 (78) 2-3/4 (74) 3-3/8 (84) 3-21/32 (89) 4-15/16 (102) 2-9/32 (58) M20870 Fig. 1. Q652B dimensions in in. (mm). INSTALLATION 1. 2. 3. 4. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition.

Wikipedia’s page for Honeywell

Publisher: www.honeywell.com