Husqvarna 316 Electric Chainsaw Owners Manual

316 Operator´s Manual English: page 1-21 Portugês: página 22-42 Electric Manuele do utilizador Manual del operador Espanol: página 43-63 108 07 09-57 SYMBOLS USED IN OPERATOR S MANUAL: Always disconnect power before performing cleaning or maintenance work. Visual inspection. ENGLISH Always use approved safety gloves. Use approved face mask or safety goggles. Do not use a coiled extension cord. Clean your chain saw regularly. min. 2 mm 1 maks. max. 30 m Minimum wire cross-section: 2 mm2 Maximum cable length: 30 m Voltage: 120 V AC CAUTION! Chain saws are dangerous! Careless or improper use can result in severe or fatal injury.

Chain Saw User Manual Free Download. Chainsaw Operator’s Manual. Chains for Chainsaws Free Instruction Manual Download PDF.

SYMBOLS ON THE CHAIN SAW: CAUTION! Chain saws are dangerous! Careless or improper use can result in serious or fatal injury. Do not expose saw to rain or moisture. Read operating instructions and make certain you understand them thoroughly before using the chain saw. MAX 400 Disconnect power in case of damage to power cable. Maximum permissible guide bar length. Always use: · Approved helmet · Approved hearing protection · Approved safety goggles or face mask This product conforms to applicable CE directives. Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in «TECHNICAL SPECIFICATIONS» p. 3 and on label. The chain saw is double-insulated. 1 ENGLISH CONTENTS Symbols Contents Technical specifications Chain saw parts EC declaration of conformity Important! Read before using chain saw Safe use Kickback prevention Chain brake with kickback guard – Brake band inspection – Kickback guard inspection – Manual chain brake function check – Inertia chain brake function check Chain catcher Right handguard Slip clutch Mounting guide bar and adjusting chain Cutting equipment Chain and guide bar lubrication – Chain oil – Filling chain oil – Checking automatic chain lubrication system – Checking chain wear – Checking drive sprocket Starting and stopping Filing chain Crosscutting Limbing Felling operations – Danger zone – Felling direction – Clearing branches/Line of retreat – Felling Daily inspection and maintenance TECHNICAL SPECIFICATIONS Motor Rated voltage Rated output Frequency Ampere Slip clutch Mechanical overload protection V AC W Hz A ENGLISH 1600 110-120 1600 50/60 13 Yes Yes Weight Without guide bar and chain With 14 ” guide bar and chain kg kg 3.8 4.4 Chain lubrication Oil tank volume Oil consumption Oil pump litres approx. litres 0.1 0.1/20 min. auto Noise levels Equivalent noise intensity at operator’s ear, according to international standards dB(A) 81 Noise emissions Sound power, measured: Sound power, guaranteed LW dB(A) LWA dB(A) 102 103 Vibration Front handle Rear handle m/s2 m/s2 4.5 7.0 Chain/guide bar Recommended bar length inches/cm inches/cm inches/cm inches/cm inches/cm inches/cm m/sec. (drive) m/sec. (drive) inches inches/mm 12 “/14 “/16 ” 12/30 14/35 16/40 12/30 14/35 16/40 14 (6 tooth) 14 (6 tooth) 3/8 ” .050 “/1.3 45/52/56 Effective cutting length Chain speed, unloaded Chain speed, rated output Chain pitch Gauge Number of drive links L 1 5 inch S 36 3/8 ” Oregon 91Vg inch/mm .050/1,3 inch/mm 5/ ” / 4,0 32 ° 85° ° 30° 0° ° inch/mm .025/0,65 inch/cm/dl 14 “/34/52 16 “/38/56 12 “/30/45 14 “/35/52 16 “/40/56 3 ENGLISH CHAIN SAW PARTS 1. Rear handle 2. Power trigger lockout 3. Front handle 4. Serial No. plate 5. Chain tensioner 13. Chain brake inside chain drive cover 14. Kickback guard 15. Chain drive cover 16. Right handguard – protects right hand in case chain breaks or derails 17. Drive sprocket – concealed by chain drive cover 6. Chain oil reservoir 7. Chain oil level 8. Ventilation slots 9. Power cable 10. Power trigger 11. Chain 12. Guide bar 18. Chain catcher – deflects chain in case chain breaks or derails 19. Guide bar nut 20. Nose sprocket 21. Scabbard 22. Combination tool 23.

Wikipedia’s page for Husqvarna

Publisher: www.husqvarna.com