From inside (document excerpt):
G 2401 OH English 2 Español . 14 Français 26 9.139-155 (06/04) High Pressure Washer Operator Manual Overview 3 Precautions . 4 Assembly Instructions 5 Operating Instructions 6 Using the Accessories 7 Working with Detergents 8 Shut Down and Clean-Up . 9 Taking a Break . 9 Winterizing and Long-Term Storage 9 Cleaning Tips . 10-11 Optional Cleaning Accessories 11 Troubleshooting . 12-13 2 Specifications Max.
Operating pressure Water volume Detergent suction Engine Part No. Serial No. 2400 PSI 2.5 GPM 0.15 0.20 GPM 5 HP Honda GC 160 1.194-505 __ Kärcher Customer Support USA Call: 1-800-537-4129 for help or visit our website: www.karcher-usa.com Kärcher Customer Service CDN Call: 1-800-465-4980 for help or visit our website: www.karcher.ca Model G 2401 OH OVERVIEW Item Description Handle High pressure hose Water inlet with garden hose connector Detergent suction tube Detergent filter High pressure outlet Spray wand Trigger gun Trigger gun safety lock Pull start Gas tank Oil fill cap Quick connect nozzles Red, Green, Black (not pictured) 14 Hose Reel (optional) Mounting Holes 15 Spark plug 11 12 13 3 Caution Follow the maintenance instructions specified in the manual. This machine has been designed for use with cleaning detergents by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty. IMPORTANT PRECAUTIONS Read First! IMPORTANT SAFETY INSTRUCTIONS WARNING When using this product basic precautions should always be followed, including the following: WARNING Risk of Injection or Injury Do Not Direct Discharge Stream At Persons. Read all the instructions before using the product. Fire hazard! Do not add fuel with the engine running. Do not operate if fuel has been spilled. Instead, move the machine to a different location and avoid creating sparks. Operate and fuel machine in a well ventilated area, free of devices featuring an open pilot or flame such as boilers, water heaters, etc. High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, animals, electrical devices, or the machine itself. 4 The Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the on position. Do not spray electrical connections, electrical outlets or fixtures. Do not touch hot surfaces or allow accessories to contact hot surfaces. Do not operate in an enclosed space, exhaust fumes are dangerous. Do not operate near utilities with open flames. Do not operate pressure washer without the water turned on. Do not use hot water. WATER SUPPLY (Cold Water Only) Water hose must be at least 5/8 inch in diameter. Flow rate of water supply must not fall below 2.5 GPM (gallons per minute). Flow rate can be determined by running the water for one minute into an empty 5-gallon container. The water supply temperature must not exceed 104°F/40°C. Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc. Always prevent debris from being drawn into the unit by using a clean water source. We strongly recommend that this high pressure washer not be left running for periods of 5 minutes or longer without the trigger gun being engaged. Wear safety goggles. Do not use acids, alkaline, solvents, or any flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine. The machine has hot surfaces which can cause burns. Operate the unit in a safe environment and away from children. Do not allow the high pressure hose to come into contact with the muffler guard. Do not leave the machine running unattended. Learn how to stop the machine and release pressure quickly. Be thoroughly familiar with the controls. Stay alert watch what you are doing. Do not operate the product when fatigued or under the influence of alcohol or drugs. Do not stand on unstable surfaces. Stand with both feet balanced at all times. Avoid tipping the machine on its side. – SAVE THESE INSTRUCTIONS – ASSEMBLY INSTRUCTIONS Step 1 Attach the handle to the frame of the pressure washer. Align holes, insert bolts, and tighten with knobs. Step 5 Pull the spring-loaded collar of the wand back to insert your choice of quick connect nozzle. Step 2 Attach the gun/hose storage handle. Step 6 Release the collar and push the nozzle until the collar clicks. 5 Step 3 Place the quick connect nozzles in the nozzle holder. Step 4 Attach the wand to the spray gun. DANGER High pressure in nozzle area. Risk of injury caused by improper locked nozzle. Make sure you hear a click when inserting the nozzle tip into the wand. Pull the nozzle to make sure it is seated properly before operating your unit.