From inside (document excerpt):
G 3000 OH English . 2 Español 14 Français . 26 9.139-161 (01/06) High Pressure Washer Operator Manual Overview 3 Precautions . 4 Assembly Instructions 5 Operating Instructions 6 Using the Accessories 7 Working with Detergents 8 Shut Down and Clean-Up . 9 Taking a Break . 9 Winterizing and Long-Term Storage 9 Cleaning Tips . 10-11 Optional Cleaning Accessories 11 Troubleshooting . 12-13 2 Specifications Max.
Pressure Water volume Detergent suction Engine Part No. Serial No. 3000 PSI 2.5 GPM 0.15 0.20 GPM 6.0 HP Honda GC 190 1.194-509 __ Kärcher Customer Support USA Call: 1-800-537-4129 for help or visit our website: www.karcher-usa.com Kärcher Customer Service CDN Call: 1-800-465-4980 for help or visit our website: www.karcher.ca Model G 3000 OH OVERVIEW Item Description 1 Handle 2 Trigger gun 3 Trigger gun safety lock 4 High pressure hose 5 Gas tank 6 Spray wand 7 Dipstick 8 Water inlet with garden hose connector High pressure outlet Detergent filter Detergent suction tube Spark plug Hose Reel (optional) Mounting Holes 14 Quick connect nozzles (not pictured) 15 Oil fill cap (pump) 16 Drain plug / washer (for pump) 9 10 11 12 13 3 IMPORTANT PRECAUTIONS Read First! IMPORTANT SAFETY INSTRUCTIONS WARNING When using this product basic precautions should always be followed, including the following: WARNING Risk of Injection or Injury Do Not Direct Discharge Stream At Persons. Read all the instructions before using the product. Fire hazard! Do not add fuel with the engine running. Do not operate if fuel has been spilled. Instead, move the machine to a different location and avoid creating sparks. Operate and fuel machine in a well ventilated area, free of devices featuring an open pilot or flame such as boilers, water heaters, etc. High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, animals, electrical devices, or the machine itself. 4 The Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the on position. Do not spray electrical connections, electrical outlets or fixtures. Do not touch hot surfaces or allow accessories to contact hot surfaces. Do not operate in an enclosed space, exhaust fumes are dangerous. Do not operate near utilities with open flames. Do not operate pressure washer without the water turned on. Do not use hot water. WATER SUPPLY (Cold Water Only) Water hose must be at least 5/8 inch in diameter. Flow rate of water supply must not fall below 2.5 GPM (gallons per minute). Flow rate can be determined by running the water for one minute into an empty 5-gallon container. The water supply temperature must not exceed 104°F/40°C. Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc. Always prevent debris from being drawn into the unit by using a clean water source. We strongly recommend that this high pressure washer not be left running for periods of 5 minutes or longer without the trigger gun being engaged. Wear safety goggles. Do not use acids, alkaline, solvents, or any flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine.