Kärcher HD 2700 DB DH 3000 DH 3500 DB C Gasoline Power High Pressure Washer Owners Manual

Model HD 2700 DB Model HD 2700 DH Model HD 3000 DH Model HD 3500 DH Model HD 3500 DB Overview .1 Precautions . .1-2 Assembly Instructions . .3 Operating Instructions . .4 Using the Accessories .5 Working with Detergents . .6 Shut Down and Clean-Up .7 Taking a Break .7 Winterizing and Long-Term Storage .7 Cleaning Tips .8-9 Optional Cleaning Accessories .9 Troubleshooting .10-11 Part No. 1.194-116 Part No.

1.194-117 Part No. 1.187-115 Part No. 1.810-997 Part No. 1.810-998 High Pressure Washer Operator Manual Specifications Model HD 2700 DH/DB Operating pressure 2700 PSI Water volume 2.8 GPM Engine 6.5 HP Honda GX 200/ Briggs & Stratton Itek Model HD 3000 DH Operating pressure 3000 PSI Water volume 3.2 GPM Engine 9 HP Honda GX 270 Model HD 3500 DH/DB Operating pressure 3500 PSI Water volume 4.0 GPM Engine 13 HP Honda GX 390/ Briggs & Stratton Vangard Manual Part No. 9.139-107 In USA Call: or visit our website: www.karcher-usa.com 1-800-537-4129 Model 2700 DH/DB, 3000 DH & 3500 DH/DB OVERVIEW NOTE: Engines controls shown may appear different. Item Description 1. High pressure outlet 2. Water inlet with garden hose connector and filter 3. Detergent suction tube 4. Knob Assembly (two each, Bolt & Knob) 5. High pressure hose 6. Detergent filter 7. Handle 8. Trigger gun 9. Trigger gun safety lock 10. Pull start (not pictured) 11. Gas tank 12. Oil fill cap (not pictured) 15 13. Spray wand 14. Dirtblaster® nozzle 15. Pressure control 1 16. Gun/hose storage handle 17. Nozzle 2 18. Detergent tray 19. Operator manuals 13 Features: · Low oil sensor · Thermal protection sensor Never Never Never Never Never Never Never Never Never point nozzle at people or animals. drink alcohol or use drugs while operating this equipment. spray electrical connections, electrical outlets or fixtures. add fuel with the engine running or operate where fuel has been spilled. touch hot surfaces or allow accessories to contact hot surfaces. operate in an enclosed space, exhaust fumes are dangerous. operate near utilities with open flames. operate pressure washer without the water turned on. use hot water. IMPORTANT PRECAUTIONS ­ Read First! Safety Warnings When using this product, basic precautions should always be followed: · Read all the instructions before using the product. · Fire hazard! Do not add fuel with the engine running. Do not operate if fuel has been spilled. Instead, move the machine to a different location and avoid creating sparks. · Operate and fuel machine in a well ventilated area, free of devices featuring an open pilot or flame such as boilers, water heaters, etc. · High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, animals, electrical devices, or the machine itself. · Wear safety goggles. · Do not use acids, alkalines, solvents, or any flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine. · The machine has hot surfaces which can cause burns. Operate the unit in a safe environment and away from children. · Do not allow the high pressure hose to come into contact with the muffler guard. · Do not leave the machine running unattended. · Learn how to stop the machine and release pressure quickly. Be thoroughly familiar with the controls. · Stay alert — watch what you are doing. · Do not operate the product when fatigued or under the influence of alcohol or drugs. · Do not stand on unstable surfaces. Stand with both feet balanced at all times. · Avoid tipping the machine on its side. · The Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the on position. Water Supply (Cold Water Only) · Water hose must be at least 3/4 inch in diameter. · Flow rate of water supply must not fall below 2.5 GPM (gallons per minute). · Flow rate can be determined by running the water for one minute into an empty 5-gallon container. · The water supply temperature must not exceed 104°F/40°C. · Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc. · Always prevent debris from being drawn into the unit by using a clean water source. We strongly recommend that this high pressure washer not be left running for periods of 5 minutes or longer without the trigger gun being engaged. This Kärcher high pressure washer is equipped with thermal protection to extend the life of your pressure washer. The thermal protector will automatically activate at a predetermined high temperature ejecting hot water before resetting. This ensures that the pump does not become damaged. 2 Caution · · Follow the maintenance instructions specified in the manual. This machine has been designed for use with cleaning detergents supplied or recommended by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty. ASSEMBLY INSTRUCTIONS Step 1 Attach the handle to the frame of the pressure washer. Align holes, insert bolts, and tighten with knobs. Step 2 Attach the gun/hose storage handle. Step 3 Attach the wand to the spray gun. 3 Step 4 Attach the triple jet nozzle to the wand. Step 7 Attach the high pressure hose to the spray gun. Step 8 Connect the high pressure hose to the unit’s high pressure outlet.