Kärcher K 9000 G Gasoline Power High Pressure Washer Owners Manual

Model K 9000 G Part No. 1.187-105.0 High Pressure Washer Operator Manual Overview . .1 Precautions .1-2 Assembly Instructions .3 Operating Instructions .4-5 Using the Accessories . .5 Working with Detergents .6 Shut Down and Clean-Up . .7 Taking a Break . .7 Winterizing and Long-Term Storage . .7 Cleaning Tips .8-9 Optional Cleaning Accessories . .9 Troubleshooting . .10-11 Specifications Operating pressure Water volume Engine 3000 PSI 3.0 GPM 9.0 HP Honda MODEL K 9000 G OVERVIEW Item Description 1.

Front Guard Water inlet High pressure outlet Oil fill On/Off Switch (not pictured) Pull start (not pictured) Fuel valve (not pictured) Knob Assembly (two each): Bolt Knob High pressure hose Handle Trigger gun safety lock (not pictured) Detergent filter Trigger gun 15 Detergent suction tube (not pictured) Gas tank 16 Spray wand Pressure control knob 17 Triple jet nozzle NEVER! Never point nozzle at people or animals. Never drink alcohol or use drugs while operating this equipment. Never spray electrical connections, electrical outlets or fixtures. Never add fuel with the engine running or operate where fuel has been spilled. Never touch hot surfaces or allow accessories to contact hot surfaces. Never operate in an enclosed space, exhaust fumes are dangerous. Never operate near utilities with open flames. Never operate without the water turned on and never use hot water. IMPORTANT PRECAUTIONS ­ Read First! Safety Warnings When using this product basic precautions should always be followed: · Read all the instructions before using the product. · FIRE HAZARD! Do not add fuel with the engine running. Do not operate if fuel has been spilled. Instead move the machine to a different location and avoid creating sparks. · Operate and fuel machine in a well ventilated area, free of devices featuring an open pilot or flame such as boilers, water heaters, etc. · High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, animals, electrical devices, or the machine itself. · Wear safety goggles. · Do not use acids, solvents, or any other flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine. · The machine has hot surfaces which can cause burns. Operate the unit in a safe environment and away from children. · Do not allow the high pressure hose to come into contact with the muffler guard. · Do not leave the machine running unattended. · Learn how to stop the machine and release pressure quickly. Be thoroughly familiar with the controls. · Stay alert — watch what you are doing. · Do not operate the product when fatigued or under the influence of alcohol or drugs. · Do not stand on unstable surfaces. Stand with both feet balanced at all times. · The Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the on position. Water Supply (Cold Water Only) · Water hose must be at least 3/4 inch in diameter. · Flow rate of water supply must not fall below 2.5 GPM (gallons per minute). · Flow rate can be determined by running the water for one minute into an empty 5-gallon container. · The water supply temperature must not exceed 104°F/40°C. · Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc. · Always prevent debris from being drawn into the unit by using a clean water source. We strongly recommend that this high pressure washer not be left running for periods of 5 minutes or longer without the trigger gun being engaged. This Kärcher high pressure washer is equipped with thermal protection to extend the life of your pressure washer. The thermal protector will automatically activate at a predetermined high temperature ejecting hot water before resetting. This ensures that the pump does not become damaged.