SPX OTC 1793 Lift Table High Lift Transmission Jack Owners Manual - Enlarge page 1 of 7
2 of 7
3 of 7
4 of 7
5 of 7
6 of 7
7 of 7
From inside (document excerpt):
R SPX Form No. 528217 Parts List & Operating Instructions for: 1793A High Lift Transmission Jack Max. Capacity: 1,000 lbs. Application: Installation and removal of automobile transmissions Safety Precautions · · WARNING: To help prevent personal injury and damage to equipment, Study, understand, and follow all safety precautions and operating instructions before operating this device.
Power Tool User Manual Free Download. HAVC Operator’s Manual. Auto AC Lift Power Free Instruction Manual Download PDF.
Wear eye protection that meets ANSI Z87.1 and OSHA standards. A load must never exceed rated jack capacity. Do not lift or support the vehicle with this jack. Adequately support the vehicle before starting repairs. Use only on a hard, level surface. Center the load on the jack saddle. Off-center loads can damage the seals in the ram and cause jack failure. Use of this product is limited to the removal, installation, and transportation, in the lowered position, of transmissions, transfer cases, and transaxles. Slowly and carefully move the jack around corners because the load could tip. Stay clear of a lifted load. Lower the jack slowly and carefully while watching the position of the load. Do not modify the jack or use adapters unless approved or supplied by OTC. Use only anti-wear hydraulic jack oil with a 215 SUS viscosity rating at 100° F. The use of alcohol, hydraulic brake fluid, or transmission oil could damage seals and result in jack failure. This guide cannot cover every situation, so always do the job with safety first. 2004 SPX Corporation Sheet No. 1 of 4 Issue Date: Rev. D, November 30, 2007 Parts List & Operating Instructions Form No. 528217, Sheet 1 of 4, Back Parts List.