STIHL Owners Manual - Enlarge page 1 of 56
2 of 56
3 of 56
4 of 56
5 of 56
6 of 56
7 of 56
8 of 56
9 of 56
10 of 56
11 of 56
12 of 56
13 of 56
14 of 56
15 of 56
16 of 56
17 of 56
18 of 56
19 of 56
20 of 56
21 of 56
22 of 56
23 of 56
24 of 56
25 of 56
26 of 56
27 of 56
28 of 56
29 of 56
30 of 56
31 of 56
32 of 56
33 of 56
34 of 56
35 of 56
36 of 56
37 of 56
38 of 56
39 of 56
40 of 56
41 of 56
42 of 56
43 of 56
44 of 56
45 of 56
46 of 56
47 of 56
48 of 56
49 of 56
50 of 56
From inside (document excerpt):
STIHL 026 Instruction Manual Warning! To reduce the risk of kickback injury use STIHL reduced kickback bar and STIHL PM 1 (3/8 ” Picco) or RM 2 (0,325 “) chain depending on sprocket or other available low kickback components. Read and follow all safety precautions in Instruction Manual improper use can cause serious or fatal injury. ,PSRUWDQW 6DIHW 3UHFDXWLRQV IRU &KDLQ 6DZ 8VHUV $ .LFNEDFN 6DIHW 3UHFDXWLRQV :DUQLQJ Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut.
Tip contact in some cases may cause a lightning fast reverse reaction, kicking the guide bar up and back towards the operator. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator. Either of these reactions may cause you to lose control of the saw which could result in serious personal injury. Section 5.12 of ANSI B 175.1-1991 sets certain performance and design criteria related to chainsaw kickback. STIHL has developed a color code system using green and yellow to help you select a powerhead, bar and chain combination that complies with the kickback requirements of the ANSI Standard. See the sections entitled “Safety Precautions ” and “Specifications ” of this manual. Do not rely exclusively upon the safety devices built into your saw. As a chainsaw user, you should take several steps to keep your cutting jobs free from accident or injury. 1. With a basic understanding of kickback, you can reduce or eliminate the element of surprise. Sudden surprise contributes to accidents. Keep a good firm grip on the saw with both hands, the right hand on the rear handle, and the left hand on the front handle, when the engine is running. Use a firm grip with thumbs and fingers encircling the chainsaw handles. A firm grip will help you reduce kickback and maintain control of the saw. Don’t let go. Make sure the area in which you are cutting is free from obstructions. Do not let the nose of the guide bar contact a log, branch, or any other obstruction while you are operating the saw. Cut at high engine speeds. Do not overreach or cut above shoulder height. continued on the back inside cover 6. Follow manufacturer’s sharpening and maintenance instructions for the saw chain. Only use replacement bars and chains specified by the manufacturer or the equivalent. Reduced kickback bars and low kickback chains are designed to reduce the risk of kickback injury. Ask your STIHL dealer about these devices. 7. 8. 2. % 2WKHU 6DIHW 3UHFDXWLRQV 1. Do QRW operate a chainsaw with one hand! Serious injury to the operator, helpers, bystanders, or any combination of these persons may result from onehanded operation. A chainsaw is intended to be used with two hands. Do not operate a chainsaw when you are fatigued. Use safety footwear; snug-fitting clothing; protective gloves; and eye, hearing, and head protection devices. RQWHQWV Main Parts of the Saw Definitions Safety Precautions The Operator The Saw The Use of the Saw Maintenance, Repair and Storing Mounting the Bar and Chain Tensioning the Saw Chain Checking chain tension Fuel Mix Fueling Chain lubricant Fill chain Oil Tank Chain Brake Information Before You Start Starting the Saw Checking Chain Lubrication Oil Quantity Control During Break- in Period During Operation After Finishing Work Spark Arresting Screen in Muffler Air Filter System Winter Operation Electric Handle Heating* Take Care of Guide Bar Checking and Replacing Chain Sprocket Adjusting Carburetor Motor management Checking Spark Plug Replacing Starter Rope and Rewind Spring Maintaining and Sharpening Saw Chain Maintenance Chart Specifications Ordering Spare Parts Storing the Machine STIHL Incorporated Federal Emission Control Warranty Statement 38 38 39 40 40 41 42 44 47 48 49 49 50 This Manual contains operating and safety instructions for all STIHL 026 series power saws. Pay special attention to the safety precautions outlined on pages 4 to 22. Allow only persons who understand this Manual to operate your chain saw. To receive maximum performance and satisfaction from your STIHL chain saw, it is important that you read and understand the maintenance and safety precautions before using your saw. Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in this Manual. :DUQLQJ Because a chain saw is a high-speed wood-cutting tool, some special safety precautions must be observed as with any other power saw to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. STIHL’s philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time-to-time. If the operating characteristics or the appearance of your saw differ from those described in this Manual, please contact your STIHL dealer for informations and assistance. Printed on chlorine-free paper 2000 Andreas Stihl AG & Co., Waiblingen 0458 133 3021. M8. E0. PM. Printed in USA *(optional extra) 0DLQ 3DUWV RI WKH 6DZ KN