STIHL FS 45 46 Trimmer Owners Owners Manual - English

STIHL FS 45, 46 Instruction Manual Manual de instrucciones Warning! Read and follow all safety precautions in Instruction Manual – improper use can cause serious or fatal injury. Advertencia! Lea y siga todas las precauciones de seguridad dadas en el manual de instrucciones – el uso incorrecto puede causar lesiones graves o mortales. English / USA Contents Allow only persons who understand this manual to operate your trimmer. To receive maximum performance and satisfaction from your STIHL trimmer, it is important that you read and understand the maintenance and safety precautions, starting on page 3, before using your trimmer.

Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in this manual. ANDREAS STIHL AG & Co. KG, 2008 0458 232 8621 C. M7.2. E8. HFP. Guide to Using this Manual 2 Safety Precautions and Working Techniques . 3 Approved Combinations of Cutting Tool, Deflector, Handle and Harness . 16 Mounting the Loop Handle . 17 Mounting the Deflector . 18 Mounting Cutting Tools . 18 Fuel 21 Fueling 22 Starting / Stopping the Engine 23 Operating Instructions 26 Cleaning the Air Filter . 26 Motor Management 27 Adjusting the Carburetor 27 Catalytic Converter . 29 Checking the Spark Plug 29 Inspections and Maintenance by STIHL Service 30 Rewind Starter 30 Storing the Machine 31 Replacing the Nylon Line . 31 Replacing the Nylon Line . 33 Maintenance Chart . 35 Parts and Controls 36 Specifications . 38 Special Accessories . 39 Maintenance and Repairs . 39 STIHL Incorporated Federal Emission Control Warranty Statement . 40 STIHL Incorporated California Exhaust and Evaporative Emissions Control Warranty Statement 42 Trademarks 44 Printed on chlorine-free paper. Printing inks contain vegetable oils; paper can be recycled. BA_SE_011_005_01_12.fm !Warning! Because a trimmer is a high-speed cutting tool some special safety precautions must be observed to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. Make sure your unit is equipped with the proper deflector, handle and harness for the type of cutting attachment being used. Always wear proper eye protection. STIHL’s philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time to time. If the operating characteristics or the appearance of your trimmer differs from those described in this manual, please contact your STIHL dealer for information and assistance. STIHl FS 45, FS 46 1 English / USA Guide to Using this Manual Pictograms All the pictograms attached to the machine are shown and explained in this manual. The operating and handling instructions are supported by illustrations. In addition to the operating instructions, this manual may contain paragraphs that require your special attention. Such paragraphs are marked with the symbols described below: Warning where there is a risk of an accident or personal injury or serious damage to property. Caution where there is a risk of damaging the machine or its individual components. Note or hint which is not essential for using the machine, but may improve the operator’s understanding of the situation and result in better use of the machine. Note or hint on correct procedure in order to avoid damage to the environment. Equipment and features This instruction manual may refer to several models with different features. Components that are not installed on all models and related applications are marked with an asterisk (*). Such components may be available as special accessories from your STIHL dealer. Symbols in text The individual steps or procedures described in the manual may be marked in different ways: : A bullet marks a step or procedure without direct reference to an illustration. Engineering improvements STIHL’s philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time to time. If the operating characteristics or the appearance of your machine differ from those described in this manual, please contact your STIHL dealer for assistance. Therefore some changes, modifications and improvements may not be covered in this manual. A description of a step or procedure that refers directly to an illustration may contain item numbers that appear in the illustration. Example: Loosen the screw (1) Lever (2). 2 FS 45, FS 46 English / USA Safety Precautions and Working Techniques Because a trimmer is a high-speed, fast-cutting power tool, special safety precautions must be observed to reduce the risk of personal injury. It is important that you read, fully understand and observe the following safety precautions and warnings. Read the instruction manual and the safety precautions periodically. Careless or improper use may cause serious or fatal injury. The terminology utilized in this manual when referring to the power tool reflects the type of cutting attachments that may be mounted on it. The term “trimmer ” is used to designate an FS unit that is equipped with a nylon line head or a head with flexible plastic blades (i.e., the Polycut head). FS models with an “R ” on the nameplate were originally configured (at the time of distribution) as a trimmer with a loop handle. !Warning As more fully explained later in these Safety Precautions, to reduce the risk of personal injury, make sure your unit is equipped with the proper handle, harness and deflector for the type of cutting attachment you are using. Use only cutting attachments that are specifically authorized by STIHL for use on your FS model. To reduce the risk of severe or fatal injury from blade contact and/or loss of control, never attempt to use a metal blade on this trimmer. Have your STIHL dealer show you how to operate your power tool. Observe all applicable local safety regulations, standards and ordinances. !Warning! The use of this machine may be hazardous. If the rotating line or blade comes in contact with your body, it will cut you. When it comes in contact with solid foreign objects such as rocks or bits of metal, it may fling them directly or by ricochet in the direction of bystanders or the operator. Striking such objects could damage the cutting attachment.