STIHL Owners Manual - Enlarge page 1 of 100
2 of 100
3 of 100
4 of 100
5 of 100
6 of 100
7 of 100
8 of 100
9 of 100
10 of 100
11 of 100
12 of 100
13 of 100
14 of 100
15 of 100
16 of 100
17 of 100
18 of 100
19 of 100
20 of 100
21 of 100
22 of 100
23 of 100
24 of 100
25 of 100
26 of 100
27 of 100
28 of 100
29 of 100
30 of 100
31 of 100
32 of 100
33 of 100
34 of 100
35 of 100
36 of 100
37 of 100
38 of 100
39 of 100
40 of 100
41 of 100
42 of 100
43 of 100
44 of 100
45 of 100
46 of 100
47 of 100
48 of 100
49 of 100
50 of 100
From inside (document excerpt):
STIHL HT 56 C Instruction Manual Manual de instrucciones Warning! Read and follow all safety precautions in Instruction Manual improper use can cause serious or fatal injury. Advertencia! Lea y siga todas las precauciones de seguridad dadas en el manual de instrucciones el uso incorrecto puede causar lesiones graves o mortales. G Instruction Manual 1 – 45 U Manual de instrucciones 47 – 95 English Contents Guide to Using this Manual Safety Precautions and Working Techniques Using the Unit Assembling the Unit Cutting Attachment Mounting the Bar and Chain Tensioning the Chain Checking Chain Tension Fuel Fueling Chain Lubricant Filling Chain Oil Tank Checking Chain Lubrication Fitting the Harness Starting / Stopping the Engine Transporting the Unit Operating Instructions Taking Care of the Guide Bar Cleaning the Air Filter Adjusting the Carburetor Spark Plug Rewind Starter Storing the Machine Checking and Replacing the Chain Sprocket Maintaining and Sharpening the Saw Chain Inspections and Maintenance by Dealer Maintenance and Care Main Parts Specifications Special Accessories Maintenance and Repairs STIHL Incorporated Federal Emission Control Warranty Statement STIHL Incorporated California Exhaust and Evaporative Emissions Control Warranty Statement Trademarks Addresses 39 40 40 Allow only persons who fully understand this manual to operate your pole pruner.
To receive maximum performance and satisfaction from your STIHL pole pruner, it is important that you read and understand and follow the maintenance and safety precautions in chapter “Safety Precautions and Working Techniques ” before using your pole pruner. For further information you can go to www.stihlusa.com. Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in this manual. Warning! Because a pole pruner is a high-speed, fast-cutting power tool with a very long reach, special safety precautions must be observed to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. STIHL’s philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time to time. If the operating characteristics or the appearance of your pole pruner differs from those described in this manual, please contact your STIHL dealer for information and assistance. Original Instruction Manual 40 ANDREAS STIHL AG & Co. KG, 2010 0458-555-8621-A. M2-5.B10.PM. 0000002629_001_GB Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. 42 44 45 { HT 56 C 1 English Guide to Using this Manual Pictograms All the pictograms attached to the machine are shown and explained in this manual. Symbols in Text Many operating and safety instructions are supported by illustrations. The individual steps or procedures described in the manual may be marked in different ways: N A bullet marks a step or procedure without direct reference to an illustration. Warning! Indicates a hazardous situation which, if not avoided, could result in severe or fatal injury. Caution! Indicates a risk of property damage, including damage to the machine or its individual components. Engineering Improvements STIHL’s philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time to time.