Toro Owners Manual - 1 of 2
Toro Owners Manual - 2 of 2
From inside (document excerpt):
570Z PRX Series Sprinklers Featuring an in-riser pressure regulator and X-FlowTM shut-off device, 570Z PRX models are ideal for applications with high or varying operating pressure, including long lines and slope applications. Specifying Information 570ZPRX XX SI COM E Model 570ZPRX Pop-Up Height 6P–6 ” (15mm) 4P–4 ” (10mm) Optional SI–Side Inlet Optional COM–Check Valve Optional E–Effluent Water For Example: When specifying 570Z PRX Series sprinkler with a pop-up height of 6 ” (15mm) with a side inlet and non-potable water option, you would specify: 570ZPRX6PSIE Specification Bidding Specifications The sprinkler shall be of the fixed-spray type designed for in-ground installation.
Lawn Sprinkler User Manual Free Download. Irrigation Free Instruction Manual Download PDF.
The sprinkler shall be capable of accepting all 570 Series spray, stream, flood, and microspray nozzles and male-threaded risers and extenders. The sprinkler shall operate within a 2075 psi (1,45,2 Bar) pressure range. The sprinkler shall have an in-riser pressure regulator that maintains constant 30 psi (2,5 Bar) outlet pressure to eliminate misting and fogging caused by pressures above 30 psi (2,5 Bar). The sprinkler shall have a high-flow shut-off device built into the riser that restricts water loss if the nozzle is removed or damaged, eliminating potential erosion or safety issues. The shut-off device shall allow for nozzle and filter replacement or maintenance while the system is running. The body of the sprinkler shall be injection molded from ABS, a noncorrosive, impact-resistant, UV-resistant, heavy-duty plastic material. The sprinkler shall have a color-coded riser screen filter, stainless steel or plastic, appropriately sized to prevent entry of foreign material to the nozzle. All parts shall be removable through the top of the sprinkler case. The sprinkler shall have a single-piece riser/body seal, that flushes only upon retraction to clear any debris from around the riser, and a stainless-steel spring to ensure positive retraction. The seal shall have no flush during pop-up to allow the maximum number of sprinklers per station. The seal shall be a single piece injection molded from Alcryn§, a synthetic rubber. (continued) 570Z PRX 6P SI 570Z PRX 4P Radius: 0’22′ (06,7m) Flow Rate: 6.5 GPH4.58 GPM (24,617,3 LPM) Recommended operating pressure range: 2075 PSI (1,45,2 Bar) Recommended operating pressure range (COM models): 4 ” and 6 ” (100mm & 150mm) Models: 2575 PSI (1,75,2 Bar) PCD nozzles: 3075 PSI (25,2 Bar) Accepts all Toro spray, stream, flood and microspray nozzles Zero flush seal and cap configuration Exposed surface: 2 ” cap diameter Body diameter: 2 “, 3 “, 4 “, or 6 ” (50mm, 76mm, 100mm or 150mm) models: 13/8 ” (35mm) 12 ” (300mm) models: 15/8 ” (41mm) Inlet size: 1/2 ” (13mm) NPT female thread Pop-up height: Pop-Up Height to Nozzle 570Z-4P 61/4 ” 41/4 ” (156mm) (108mm) 61/4 ” 570Z-6P 81/4 ” (210mm) (156mm) 61/4 ” 570Z-6P SI * 81/4 ” (210mm) 156mm) * Side Inlet = 43/4 ” (120mm) from top of sprinkler to center of side inlet. s Sprinkler weight: 570Z-4P 3.2 oz. 570Z-6P 4.1 oz. 570Z-6P SI 4.2 oz. SEPTEMBER 2000 570Z PRX Series Sprinklers Bidding Specifications (cont.) Recommended Installation Instructions The sprinkler shall be capable of nozzle alignment via a two-piece ratcheting riser. The sprinkler shall be available in models with a check valve or standard models shall be capable of accepting a check valve that will prevent low head drainage with elevation differences up to 10′ (3m). A 1/2 ” (13mm) NPT plug shall be provided with all side inlet models to plug the unused inlet. A degradable flush plug and plunger shall be factory-installed to eliminate debris intrusion during installation and line flushing. A lavender effluent water cap shall be available, factory pre-installed. A lavender effluent water cap cover shall also be available and capable of snap fitting to all sprinkler caps. 570Z-PRX-4P.