Toro Owners Manual - 1 of 2
Toro Owners Manual - 2 of 2
From inside (document excerpt):
EZ-Flo® Plus Series Valves Proven reliability. Easy to service and use. That’s exactly what homeowners want in a residential valve. Although new to Toro, EZ-Flo Plus is built on years of experience. Reliability isn’t just a claim; it’s a fact. And what makes it so EZ, is its jar-top design and threaded bonnet that allows you to reach internal parts without removing the valve from the system. There are no screws to get lost in the process.
Lawn Sprinkler User Manual Free Download. Irrigation Free Instruction Manual Download PDF.
Another benefit, EZ-Flo Plus’ configuration includes both internal and external bleed. Internal bleed saves water, while external bleed flushes out debris. Give homeowners what they want–reliability with ease. It’s not a hard choice when EZ-Flo Plus is part of your offering. Specifying Information–EZ-Flo Plus EZF Flow Control 0–w/o Flow Control 2–w/Flow Body Threads 0–Slip 1–Male x Male, NPT Threads 5–Male x Barb 6–Female, NPT Threads 8–Angle, NPT Threads 9–AVB, NPT Threads X X 0 X Solenoid 0–60 Hz Size 3–3/4 ” 4–1 ” For Example: When specifying a 1 ” (25mm) slip EZ-Flo Plus Valve with flow controland a 60 Hz solenoid, you would specify: EZF-20-04 Note: Some model combinations not available. Consult the current Residential/Commercial price list (490-2843) for a complete description. Specifications s Bidding Specifications The [3/4 “/1 “] (20mm/25mm) EZ-Flo Plus valve shall be a [globe/angle/AVB] configuration and shall be constructed of durable engineering plastic material with [female/male]-[threaded/slip] inlet and [female/male]-{threaded/slip barbed] outlet connections. The bonnet shall be threaded with a heavy-duty cap ring, requiring no screw removal for fast and easy servicing. The valve shall be serviceable without the need to be removed from the system. The valve shall have a working pressure range from 10 PSI (0,7 Bar) minimum to 150 PSI (10 Bar) maximum and a recommended flow range from 0.25 to 30 GPM (1 to 114 LPM). The valve shall have a rugged, double-beaded Santoprene® diaphragm. The valve shall have a Buna-N valve seat seal. The valve shall be a normally closed configuration with 18 ” (45cm) solenoid lead wires that attach to a removable 24 V a.c. encapsulated solenoid with a waterproof coil. The valve shall have a self-cleaning, stainless-steel metering pin to protect bleed ports and to purge contaminants without the use of a filter screen. The valve shall have a forward-flow design and an external manual downstream bleed/flush. The valve shall have an internal manual downstream bleed to prevent flooding of the valve box. The valve shall have a manual flow control with a hand-operated, rising-type flow-control stem with a control wheel/handle. The valve shall have a floating bleed tube that allows thermal expansion without affecting performance. MARCH 2001 s EZ-Flo Plus Valves s Flow range: 3 /4 ” models: 0.25-20 GPM (1-76 LPM) 1 “: 0.25-30 GPM (1-114 LPM) Body styles: Globe: – 1 ” (25mm) female NPT and slip – 1 ” (25mm) male NSP and barb Angle: – 1 ” (25mm) female NPT Atmospheric Vacuum Breaker (AVB) – 3/4 ” (20mm) and 1 ” (25mm) female NPT Solenoid: 24 V a.c. Inrush: 0.4 amps, 11.50 VA Holding: 0.2 amps, 5.75 VA Dimensions: Female and male globe: 51/8 ” H x 3 ” W x 4 ” L (130mm H x 75mm W x 101mm L) 3 3 Angle: 5 /8 ” H x 3 ” W x 3 /4 ” L (137mm H x 75mm W x 95mm L) 7 AVB: 6 ” H x 3 ” W x 6 /8 ” L (152mm H x 75mm W x 175mm L) Double-beaded Santoprene® diaphragm Manual internal and external bleed Encapsulated solenoid with captured hex plunger and spring Threaded bonnet system with cap ring Low-flow capability down to 0.25 GPM (1 LPM) EZ-Flo® Plus Series Valves Recommended Installation Instructions In all installations (except AVBs), it is advantageous to mount valves in a valve box. Logically, if mounted in valve boxes.