Toshiba e-STUDIO 350 450 Copier Operators Manual - Enlarge page 1 of 309
2 of 309
3 of 309
4 of 309
5 of 309
6 of 309
7 of 309
8 of 309
9 of 309
10 of 309
11 of 309
12 of 309
13 of 309
14 of 309
15 of 309
16 of 309
17 of 309
18 of 309
19 of 309
20 of 309
21 of 309
22 of 309
23 of 309
24 of 309
25 of 309
26 of 309
27 of 309
28 of 309
29 of 309
30 of 309
31 of 309
32 of 309
33 of 309
34 of 309
35 of 309
36 of 309
37 of 309
38 of 309
39 of 309
40 of 309
41 of 309
42 of 309
43 of 309
44 of 309
45 of 309
46 of 309
47 of 309
48 of 309
49 of 309
50 of 309
From inside (document excerpt):
User and Operator’s Manual for Toshiba e-STUDIO 350/450 Copier. Model types specification:
- Toshiba e-STUDIO 350 Copier
- Toshiba e-STUDIO 450 Copier
Free PDF Service and Owner’s Manual Download.
Contents
EPA ENERGY STAR ® (MFD)
The United States Environmental Protection Agency (EPA) has introduced a voluntary programme, the ENERGY STAR programme, to encourage the widespread and voluntary use of energy-efficient technologies that enhance the workplace, improve product performance and prevent pollution. As anENERGYSTAR Partner, the TOSHIBA TEC CORPORATION has determined that this copier model meets the ENERGY STAR guidelines for energy efficiency.
ENERGYSTAR guidelines for this class of copier requireENERGY STAR copiers to have an ‘Off Mode’ feature that automatically turns the copier off after a period of inactivity, ensuring night and weekend shutoff. The copier must also automatically change to a ‘Low Power Mode’ (Automatic Energy Save) after a period of time since the last usage.
For Copier/Printer + Fax models, ENERGY STAR guidelines for this class of copier require ENERGY STAR Multifunction copiers to have a ‘Sleep Mode’ feature that automatically makes the copier enter the sleep mode after a period of inactivity. The copier must also automatically change to a ‘Low Power Mode’ (Automatic Energy Save) after a period of time since the last usage.
Specifically, this copier complies with the following requirements.
e-STUDIO350/450 Copier model (Base model)
‘Automatic Energy Save’
The copier consumes less than 139. 75 watts (e-STUDIO350)/178. 25 watts (e-STUDIO450) during Energy Save
‘Automatic Energy Save’ Default Time
The default time for the ‘Automatic Energy Save’ is 15 minutes.
‘Off Mode’
The copier consumes less than 15 watts (e-STUDIO350)/20 watts (e-STUDIO450) in the ‘Off Mode’.
‘Off Mode’ Default Time
The default time for the ‘Off Mode’ is 60 minutes (e-STUDIO350)/90 minutes (e-STUDIO450).
e-STUDIO350/450 Copier/Printer + Fax model (Multifunction model)
‘Automatic Energy Save’
The copier consumes less than 184. 75 watts (e-STUDIO350)/223. 25 watts (e-STUDIO450) during Energy Save.
‘Automatic Energy Save’ Default Time
The default time for the ‘Automatic Energy Save’ is 15 minutes.
‘Sleep Mode’
The copier consumes less than 80 watts (e-STUDIO350)/95 watts (e-STUDIO450) in the ‘Sleep Mode’.
‘Sleep Mode’ Default Time
The default time for the ‘Sleep Mode’ is 60 minutes (e-STUDIO350)/90 minutes (e-STUDIO450).
The default time for the ‘Sleep Mode’ is 60 minutes (e-STUDIO350)/90 minutes (e-STUDIO450).
The default setting for the ‘Off Mode’ or ‘Sleep Mode’ and ‘Automatic Energy Save’ can be changed. The default setting for the ‘Off Mode’ or ‘Sleep Mode’ and ‘Automatic Energy Save’ can be changed. For Multifunction model, if the Fax or printer data is received in the sleep mode, the copier starts warming itself up and prints out the data when it becomes ready. Also, when the start button or the energy saver button on the control panel is pressed, the copier starts warming itself up.
energy saver button on the control panel is pressed, the copier starts warming itself up.
For Base model, the copier automatically shuts off in off mode. To use the copier again, turn the power switch on.
switch on.
For Base model, after an automatic shutoff, weekly timer feature cannot be activated. If you prefer to activate this feature, contact you authorized Toshiba dealer.
In accordance with EPA ENERGY STAR programme guidelines, Toshiba recommends the following recycled
paper.
Great White MultiUse 20 paper
Great White MultiUse 24 paper
If you have any questions regarding the use of recycled paper or some recommended types of recycled paper,
please contact your authorized Toshiba dealer.
ENERGY STAR is a U. S. registered mark.
TABLE OF CONTENTS
NOTICE TO USERS. 5
TOSHIBA QUALITY IS SECOND TO NONE. 6
PREFACE. 8
FEATURES OF THE e-STUDIO350/450. 9
GENERAL PRECAUTIONS. 10
When Installing or Moving. 10
• When Using the Multifunctional Digital Systems. 13
• During Maintenance or Inspection. 15
• When Handling Supplies. 16
DISCLAIMER NOTICE. 17
1. BEFORE USING EQUIPMENT. 19
1. DESCRIPTION OF EACH COMPONENT. 20
• Main Components. 20
• Optional Equipment. 21
• Control Panel. 23
• Adjustment of the Angle of the Control Panel. 25
• Touch Panel. 27
2. TURNING ON THE POWER SWITCH. 30
• Turning on/off the Power. 30
• Controlling the Use of the Copier with Department Codes. 32
• Controlling the Use of the Copier Using the Optional Key Copy Counter. 33
3. SWITCHING TO THE ENERGY-SAVING MODE. 34
2. HOW TO MAKE COPIES. 35
1. SETTING COPY PAPER. 36
• Acceptable Copy Paper Types and Sizes. 36
• Toshiba-Recommended Paper/Handling and Storing Paper. 37
• Changing the Paper Size of the Drawer/Setting the Drawer for Special Uses. 38
2. SETTING ORIGINALS. 45
• Acceptable Original Types and Sizes/Maximum Number of Sheets that can be Stored. 45
• When Placing an Original on the Glass. 46
• When Using the Reversing Automatic Document Feeder (optional). 48
3. GENERAL COPYING PROCEDURES. 51
4. AUTO JOB START (JOB PRESET). 54
5. INTERRUPT COPYING. 56
6. STOPPING THE COPY OPERATION. 57
7. BYPASS COPYING. 58
• Bypass Copying. 58
3. SETTING OF BASIC COPY MODES. 65
1. PAPER SELECTION. 66
• Automatic Paper Selection (APS). 66
• Manual Paper Selection. 68
• Setting the [OTHER SIZE] button. 69
• Mixed-sized Originals. 70